при перезагрузке ноута выдается такая шляпа. что может быть, гугл пока не помогает но я не отчаиваюсь.
Скорее всего после некоей ошибки биос переключился в «по-умолчанию», а там стояло sata2, о которой твоя винда не знает, попробуй залезть в биос и ide вернуть.
нету такой возможности в этом дибильном ноуте. HP Compaq 510
Вряд ли, похоже на сообщение биоса. Тогда сие ничего хорошего не значит и пора бекапить данные с винта при помощи другого компа.
данные там вроде как нах не нужны, т.е. это один сотрудник говорит мол «нахаляву достался ноут но чото не работает, глянь, а?» вот думаю, может бивис обновить? только что-то самый последний на эту модель 2007 годом датируется, и как обновлять не написано. на EEE PC все проще как то..
Попробуй обнови конечно (с дискетки надо обновлять). Но судя по всему там похерился контроллер IDE или SATA, и я бы пер ноут в гарантийку.
мне тоже кажется что контроллер похерился. так он не на гарантии, ноуту сто лет, меня просят узнать сколько будет стоить ремонт, мол надо ли связываться.
так, а еще вопрос, попробовал систему переустрановить, нашел раздел recovery кто знает какие кнопки надо при загрузке нажать чтобы он пустил загрузку с него?
Надо грузится с рекавери cd-диска, на сколько я в курсе. Можно еще попробовать f2 или esc подолбить при загрузке
оказалось всего лишь умер хард, а хозяин говорил что хард точно живой мол его проверяли.
Эта ошибка возникает, если на жëстком диске не определяется контроллер. Проще всего заменить HDD.
В марте 2015 года такое было. CD-ROM тоже перестал пахать, только уже с июля 2014.
FIRST: If you run into this, IT IS NOT YOUR HARD DRIVE. that is a problem.
SECOND: Try booting through USB External, sometimes can bring you to Drive Lock and asks for bay pass, hit enter.
brings you to START UP IN SAFE MODE OR NORMALLY n what nots.
THIRD: When I ran Into this problem simply removed the HD and the adapter ribbon, restarted with USB CD its a EMERGENCY BOOT CD, opened MINI XP, checked the HD’s(multiple) all fine, reboot, ran startup checks, all that, reboot, finally, no error ( ren into that relief using my SECOND method )
Havent completely got up and running but when i git it i can detail with pictures and info on a FIX!
I get that you are frustrated but i don’t know your situation.
What is your problem, i can’t help you if i don’t know what your problem is.
The doors of wisdom are never shut. Benjamin Franklin & We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela
Well I have seperate HDD’s so i swap them from my computer every now and again, and just recently got a external usb hook up to access them, and somehow i felt this was IT, and IT was.
my computer is giving me the 1782 ERROR and there are NO damages or malfunctions i can assure you this, ive checked them on other computers, ran tests, COMPLETELY wiped one, used different id types and even got one to have a bootable LINUXKEY partition,
it stays at the disk controller error then windows rerror recovery
it doesnt boot completely it just, restarts, maybe reg error of some sort or corruption idk, maybe have to reinstall?
If you want to reinstall i always can help you but not yet.
The doors of wisdom are never shut. Benjamin Franklin & We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela
No, that had to do with a CD drive, My HP Compaq 2710p has no CD drive
HP Compaq 2710p Windows Vista Business OEM (Windows XP Pro Downgradeable)
ERROR 1782-Disk Controller Failure-Run Startup Check (is My Message)
Do you know how to reset the bios?
The doors of wisdom are never shut. Benjamin Franklin & We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela
i would like to reset it. but no, i do not know how, i read some stuff online but shakey, id really much like to reset all battereys and all that so there is no messed up, false, or random effed u stuff saved up somehow, like a full complete reset
Look at page 37, t his is h ow you can reset the bios.
The doors of wisdom are never shut. Benjamin Franklin & We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela
okay i did that, didnt help the error, still pops up during start up, then goes to non system disk or disk error
when i use Emergency Boot Disks, Windows XP or even Vists CD’s they show NO HD’s connected unless through USB port which Vista cannot install to because it does not support installation through these ports.
My laptop has no CD drive built in so the disk error information i found from 1790-1793 or 4 i believe all have to do with the optical drive or something physical that was never some appendage of this tablet notebook previously.
I have my product regestered along with a few other products, i have some more to keep regesterring
The bios has been reset, still does not recognize the HD in place and still has error at beginning of startup
Tried installing visTA and xp with no dice. been able to boot a Ubuntu 12.4 and 12.10 flash drives, even through my HD (through usb adapter) but cannot get it to do anything with the HD i suppose.
so. there is really no way to ACTUALLY reset this thing like if i FORREAlly just got it OUT OF THE BOX?
Принесли мне ноутбук, не могу разобраться в чем дело.
Включается, ОС загружает через раз, выдает сообщения:
1782 disk controller failure PXE-E61 test failure Disk error
(сообщения показывает по очереди)
Если винда загрузится, то может зависнуть в любой момент, и при перезагрузке снова не бутится. (при зависании из веника раздаются щелчки) Если грузить например windows PE, то проверка ЖД в начале загрузки приводит к зависанию (при этом даже мышь не двигается)
Подскажите, что сделать, можно ли восстановить работоспособность ноута?
——- Кошка имеет 4 ноги: Вход, выход, земля и питание.
1782-disk controller failure ok whats this mean and how do i fix it. this doesnt sound good. its a compact presario 500mhz 256mb 10g hd win98 3yrs old blah,blah,blah! all the obvius things wont start it so i tried to run my quickrestore cd and it wont even load it i whent into startup bios and checked all the settings all ok i even reset the defaults i tried with the start up disc it loads but wouldnt with cd support ive had this problem before with my burner so i unplugged it and it now starts with cd rom support but the quick restore still wont load so i tried to fdisk and reformat that went ok and my drive is now clean now upon running setupit gets as far as scandisk and tells me windows needs. kbs to install. nothing else ever happens ive tried about ten times and it wont work
EDIT: just so no confusion i treid both athe quick restore cd and a cllean install from a win 98 cd
lyrical
Of course, it could be any of these things, and each problem has different reprocussions. So lets start simple..
Have you been moving the HD around? You’ll want to try and swap your IDE cable anyway to eliminate it as a problem, so you might as well check for bent pins now. Try a new cable on the same IDE slot. If that doesnt work, move it to the other IDE slot. Make sure that you make any nessesary BIOS changes. If you have access to another HD that you know works, you may want to try that as well to iliminate the connector as the problem.
It could also be an issue of the HD being physically damaged. You havn’t by chance had a crash lately have you?
Try some of this stuff, and get back to me.
kilowatt1
LANMaster
coolhand420
kilowatt1
coolhand420
kilowatt1
If I’m not mistaken on the same page as the Rompaq there is a download for the system diagnostics which will help determine if the hard drive or any other hardware is defective. Click on the more info choices for installation instructions for the various downloads. Let us know how you do.
kilowatt1
The Rompaq you will need to use is «Presario System Rom 686C3 Update for Specific Models».
coolhand420
coolhand420
lyrical
I was speaking with a couple other tech heads in class last night and mentioned your little problem.
I personally dont know how much validity there is behind his thesis, but I thought I would convey his thoughts to you.
Have you tried hooking your HD to a working PC? Based on the information I have heard in the last 24 hours, if your HD works in another machine you may be able to simply replace your MOBO.
Let me know what happens.
coolhand420
coolhand420
lyrical
Given the fact that the HD did not work in another machine, and it also failed a diagnostic leads me to believe that your HD has crashed.
You also tried hooking a working HD up to the machine, didn’t you? If a working HD did not work, the problem may be harder to forsee.
Some of the older machines have problems with HDs when the jumper settings do not corispond to the physical location of the drive on the cable. Meaning it needs to be set to master AND be the first device on the IDE cable. Having a slave as the first device on the IDE cable will cause you problems in older machines.
Try hooking either the old HD or the new HD you ordered up to the machine, and boot with a DOS boot disk. Go into FDISK and look at the partition tables. If it shows the tables, then the master boot record and FAT table should be in tact. While you are in FDISK look for the ACTIVE PARTITION. At least one partition needs to be labeled as active in order for the system to boot correctly.
While you have the DOS disk in, try running scandisk on the drive. It may not work, but it may also tell you weather or not the drive is shot.
It is starting to sound like the drive is shot. We’ll see.
I have a Compaq model 5835 w/celeron processor running Win98. The hard drive crashed, something came loose inside the drive. I replaced the drive with a good one from another computer, with Windows ME o/s. When I boot the computer, I get the 1782 Disk Controller Failure message, and I’m given two options. F1 to boot computer, or F10 to enter setup. Either option works. F10 enters setup mode, where I have reset the default values, and F1 boots the computer, after which everything works fine. The only hang up is at boot. I can’t seem to get rid of the error message and the F1 and F10 options. I have moved the jumper to reset the bios on the MB, but I still get the same error message. Device manager says the primary and secondary hard disk controllers are working properly. When I boot, using the F1 option, the hard disk spins up, loads the o/s and all is well. If the disk controller was bad, would it still do this? Is there a way to reset or somehow get rid of the error message so the computer would boot without going through the F1 option? If the disk controller has failed, can I install an IDE controller card in a PCI slot and bypass the onboard controller? Any suggestions are welcome. Thanks for your help!
I have a way to resolve your problem, You Just remove the CMOS battery from system board and boot once after booting shutdown your system and insert the battery back, again start your system and press F1 next time it won’t ask you for pressing F1. And you will not get the error controller disk failure. I hope it will help you.
Профиль | Отправить PM | Цитировать
