Мтд устройства что это
Записки Линуксоида
Я вижу Мир, Мир видит меня
Memory Technology Device (MTD) support
Memory Technology Device (MTD) support
Memory Technology Devices are flash, RAM and similar chips, often used for solid state file systems on embedded devices. This option will provide the generic support for MTD drivers to register themselves with the kernel and for potential users of MTD devices to enumerate the devices which are present and obtain a handle on them. It will also allow you to select individual drivers for particular hardware and users of MTD devices. If unsure, say N.

Если не уверены, скажите N.
This turns on low-level debugging for the entire MTD sub-system. Normally, you should say N.

Обычно вы должны сказать N.
MTD concatenating support

Если не уверены, скажите Y.
MTD partitioning support
If you have a device which needs to divide its flash chip(s) up into multiple ‘partitions’, each of which appears to the user as a separate MTD device, you require this option to be enabled. If unsure, say ‘Y’.
Note, however, that you don’t need this option for the DiskOnChip devices. Partitioning on NFTL ‘devices’ is a different — that’s the ‘normal’ form of partitioning used on a block device.

Обратите внимание, что вам не нужна эта опция для устройств DiskOnChip. Разбиение на «устройствах» в NFTL отличается — это «нормальная» форма разбиения, используемая на блочных устройствах.
Direct char device access to MTD devices
This provides a character device for each MTD device present in the system, allowing the user to read and write directly to the memory chips, and also use ioctl() to obtain information about the device, or to erase parts of it.

Caching block device access to MTD devices
Although most flash chips have an erase size too large to be useful as block devices, it is possible to use MTD devices which are based on RAM chips in this manner. This block device is a user of MTD devices performing that function.
At the moment, it is also required for the Journalling Flash File System(s) to obtain a handle on the MTD device when it’s mounted (although JFFS and JFFS2 don’t actually use any of the functionality of the mtdblock device).
Later, it may be extended to perform read/erase/modify/write cycles on flash chips to emulate a smaller block size. Needless to say, this is very unsafe, but could be useful for file systems which are almost never written to.
You do not need this option for use with the DiskOnChip devices. For those, enable NFTL support (CONFIG_NFTL) instead.

В настоящий момент также требуется, чтобы Journalling Flash файловая система(ы) получала дескриптор устройства MTD при его монтировании (хотя JFFS и JFFS2 фактически не используют никаких функций устройства mtdblock).
Позже он может быть расширен для выполнения циклов чтения/стирания/изменения/записи на чипах флэш-памяти, чтобы эмулировать меньший размер блока. Излишне говорить, что это очень небезопасно, но может быть полезно для файловых систем, в которые почти никогда не записываются данные.
Вам не нужна эта опция для использования с устройствами DiskOnChip. Для них включите поддержку NFTL (CONFIG_NFTL).